Access control installation in an industrial facility with high cleanliness standards — professional, clean work from start to finish by AITS

7 December 2025

Factories requiring high cleanliness standards, such as

food factories,
pharmaceutical factories,
cleanrooms
and electronics factories,
need access control systems that aresecure, reliable and installed with the highest possible cleanlinessto avoid contaminating production lines.

AITS therefore designs an installation process thatHigh-Clean Standardcovers preparation through system handover, giving customers confidence that every step follows international industrial standards.

The AITS High Clean Standard access control installation process

1. Prepare the area and control cleanliness before work: Pre-Clean & Preparation

Before installation, the AITS team:

Cleans floors and walls at installation points
Places dust protection sheets around the work area
Uses Clean-Safe equipment for industrial areas
Keeps cables, tools and equipment boxes organized without disrupting production areas

2. Clean cable routing without residual debris: Clean Cable Management

To prevent contamination:

Use food-grade or industrial-grade cable conduits
Drill walls and doors using dust-control tools
Vacuum and wipe the area immediately after drilling
Route cables close to walls to reduce dust accumulation points
Seal conduit ends and drilled holes securely

3. Clean installation without fingerprints or marks on walls

AITS applies these standards:

Wear gloves when installing every component
Clean the scanner screen and sensors
Use a laser level for precise alignment
Fit magnetic locks flush without leaving gaps
Clean the installation thoroughly before handover

4. Thorough system checks without disrupting production: Silent Testing

Test door opening and closing
Check real-time logs
Verify employee access permissions
Test fail-safe and fail-secure operation
Test backup batteries

Every step usesLow-Noise, without creating vibration in production areas.

5. Clean the area after installation: End-to-End Cleanup

After completing the work:

Collect all leftover materials and waste
Wipe walls, doors and floors clean
Check the finish for any installation marks
Return the area as clean as before work began, or cleaner.

Customers can therefore be confident thatproduction processes will not be affected.

Why factories with high standards choose AITS

A team trained in clean industry installation
Dust-free and clean-control tools
Installation without dust, marks or obstructive cables
Safe work without disrupting production lines
Post-installation assessment documentation: Post-Clean Report
Annual inspection services available

AITS prioritizes bothsystem security and site cleanlinessto provide customers with the highest standard of service.

— Let AITS Set the Standard —

📞Design and install your smart home with us

Call:02-878-2951 ext. 100

LINE: @aitscctv

Facebook: fb.com/aitscctv

🛒 Lazada: AITS Official Store

🌐 Website: www.aitscctv.com

#FactoryAccessControl #HighStandardCleanroom #AITS #DustFreeInstallation #FoodFactory #PharmaceuticalFactory #IndustrialAccessControl #HighCleanStandard

Installing Access Control in High-Clean Industrial Environments — AITS Delivers End-to-End Clean, Professional, and High-Standard Service

Industries requiring strict hygiene standards — such as

food manufacturing
pharmaceuticals
electronics
cleanrooms
demand an Access Control system installed with zero contamination, high precision, and strict cleanliness procedures.

AITS provides High-Clean Standard Access Control Installation, ensuring every step—from preparation to handover—is performed to professional, industry-grade quality.

AITS High-Clean Access Control Installation Workflow

1. Pre-Cleaning & Work Area Protection

Before installation, AITS performs:

Surface cleaning around the work zone
Dust-control floor mats
Clean-industry grade protective equipment
Organized tool and equipment arrangement to avoid contamination

2. Clean Cable Routing (No Dust, No Debris)

We follow strict industrial cleanliness protocol:

Food-grade / industrial conduit
Dust-controlled drilling equipment
Immediate vacuum and wipe-down after drilling
Tight, clean cable alignment along the wall
All openings sealed after installation

3. Clean Device Installation (No Smudges, No Marks)

Our installation standards include:

Wearing gloves at all times
Cleaning scanner surfaces and screens
Laser-level alignment for perfect positioning
Magnetic lock installation with zero gaps
Final wipe-down to ensure a “new build” finish

4. Silent Testing (Non-Intrusive System Verification)

AITS tests the system without disrupting production:

Open/Close door testing
Real-time log verification
Permission and role testing
Fail-Safe / Fail-Secure functionality
Backup power simulation

All tests are performed quietly, cleanly, and vibration-free.

5. End-to-End Cleanup (Professional Site Restoration)

After installation:

All debris removed
Surfaces cleaned and polished
Walls/doors wiped and restored
Area returned to perfect clean state

Clients receive a workspace as clean as before installation — often cleaner.

Why High-Clean Industries Trust AITS

Trained in clean-industry installation protocols
Dust-free tools and installation methods
No exposed cables, no dust, no marks
Non-disruptive work process suitable for production environments
Post-installation Clean Report included
Long-term maintenance available

AITS ensures both system security and environmental cleanliness, delivering a truly high-standard installation.