How to test LAN cables professionally
Some homes and offices experience disconnected devices or slow internet after smart home installation despite a fast internet plan. This often results fromdamaged or poor-quality LAN cables.AITS inspects and resolves LAN cable issues for effective performance.
How LAN cables can cause smart home problems
• Poor-quality cables that do not meet Cat5e / Cat6 standards
• Cable runs exceeding 100 meters without signal extension
• Incorrectly terminated or loose connectors
• Internal breaks caused by bending or pinching
Professional LAN cable testing steps
1. Use a LAN cable tester– Check that all eight wires are connected correctly
2. Run a speed test– Check actual operating speeds
3. Check interference– Especially when cables run near high-voltage wiring
4. Check cable length– Ensure it meets the standard
5. Check PoE, if used– Verify complete power and data delivery to PoE devices such as CCTV cameras
AITS solutions
• Check every cable point before handover
• Use internationally standardized testing equipment
• Repair or replace faulty cables immediately
• Design cable routes to prevent future problems
⸻
Why choose AITS for maintenance?
Our technical team uses professional tools and understands that smart home systems need reliable networking for effective operation.
— Let AITS Set the Standard —
📞 Design and install your smart home with us
Call:02-878-2951 ext. 100
LINE: @aitscctv
Facebook: fb.com/aitscctv
🛒 Lazada: AITS Official Store
🌐 Website: www.aitscctv.com
How to Test Your LAN Cable Like a Pro
Many smart homes or offices suffer from devices dropping offline or slow internet, despite having high-speed packages. Often, the culprit is a faulty or low-quality LAN cable. AITS provides solutions to test and fix LAN cable issues for maximum performance.
How LAN Cables Cause Smart Home Problems
• Low-quality cables not meeting Cat5e / Cat6 standards
• Cable runs over 100 meters without signal extenders
• Improperly crimped connectors or loose pins
• Internal wire damage from bending or pressure
Professional LAN Cable Testing Steps
1. Use a LAN Cable Tester – Check correct wiring for all 8 pins
2. Run a Speed Test – Measure actual throughput
3. Check for Interference – Especially if cables run near high-voltage lines
4. Measure Cable Length – Ensure it’s within standard limits
5. Verify PoE Performance (if used) – Ensure power and data reach PoE devices like CCTV
AITS Solution
• Test every cable point before handover
• Use internationally certified testing tools
• Fix or replace faulty cables immediately
• Design cable routing to prevent future issues
Why Choose AITS?
Our technical team uses professional tools and understands that smart homes require the most stable network possible for full performance.
— Let AITS Set the Standard —
Tel: 02-878-2951 press 100
LINE: @aitscctv
Facebook: fb.com/aitscctv
🛒 Lazada: AITS Official Store
🌐 Website: www.aitscctv.com